Skip to main content
Sign in

Display and analyze blood glucose data (Patient)

Adrian Ostrowski
  • Updated

After you login to GlucoContro.online, you will see your data Dashboard composed of two main sets of elements: graphs and KPI (Key Performance Indicator) tiles.

blobid0.png

Graphs

 

There are two main graphs in the dashboard.

All Graphs are plotted for the time Period set. You can either choose one of the predefined periods or set one manually using the calendar on the right side of this ribbon. 

blobid1.png

GLUCOSE CONCENTRATION LEVELS

This graph depicts the number and percentage of readings in the selected period falling into your personalized target ranges. To learn more on the target ranges and other settings please refer to chapter 2.11 of this user guide. 

blobid2.png

BLOOD GLUCOSE CONCENTRATION

This graph depicts the readings on the time axis in the selected period falling into your personalized target ranges. To learn more on the target ranges and other settings please refer to chapter 2.11 of this user guide. 

blobid3.png

You can set different aggregations for the graph using Aggregated option in the Measurements Presentation section above the graph. 

blobid4.png

You can also group the readings by various options by using Grouped option:

blobid5.png

KPIs

All KPIs are calculated for the Period set. You can either choose one the predefined periods or set one manually using the calendar on the right of this ribbon. 

blobid6.png

Readings shows the number of results in the period we specified.

blobid7.png

AVG Readings shows us the average number of readings per day over the period we have set.

blobid8.png

Days without reading shows the number of days in which no reading was made over the period we have set.

blobid9.png

Glucose Management Indicator, it is calculated using the following formula:

3.31 + 0.02392 x [overall average in mg / dl] and displayed as a percentage. 

blobid10.png

Very High and Very Low shows the number of readings outside your critical target range. To learn more on the target ranges and other settings please refer to chapter 2.11 of this user guide.

blobid11.png

Standard Deviation shows the standard deviation expressed in [mg / dL] or [mmol / L], calculated with all measurements over the selected period.

blobid12.png

Average pre-meal, Average post-mealand Average

Average pre-meal: shows an average calculated only for results marked as pre-meal or fasting in the period set.
Average post-meal:shows an average calculated only for results marked as post-meal in the period set.

blobid13.png

Note

If more than half of the readings in the selected period has no meal marker set then instead of these two KPIs only one Overall Average will be displayed, that is calculated for all the readings in that period. 

 

CV
Coefficient of variation is calculated as:

[standard deviation] / [overall average]

and displayed as a percentage

blobid14.png

AGP View

You can switch your dashboard to AGP (Ambulatory Glucose Profile) mode using the AGP View toggle at the top of the page.

blobid15.png

In this mode both graphs will show readings falling into target ranges defined for AGP and not your individual target ranges. You will see AMBULATORY GLUCOSE PROFILE (AGP) graph instead of the BLOOD GLUCOSE CONCENTRATION graph. Additionally there will be a set of small graphs below depicting the DAILY GLUCOSE PROFILE.